Today's Gold Rates:
Loading...

5D hard gold, explained: how it is made, and what it is worth later

November 18, 20264 min readBy Shivam Jain
5D hard gold from wax to hollow gold: a green wax model of a floral teardrop pendant, the finished 24K gold pendant, and the same pendant cut open to show a hollow shell with a wall 0.1 to 0.25 mm thick, beside an electroforming bath

5D hard gold is real gold, usually 24 karat, made as a hollow shell thinner than two sheets of paper. It looks like a heavy piece and weighs a fraction of one. The method behind it, electroforming, decides what the piece can take and what it is worth later.

What it is

Pure gold grown on a wax model, then emptied.

Why it is light

It is hollow. Makers say it takes a third of the gold of a cast piece.

What comes back

The gold, at the day's rate. The making charge does not.

How a 5D piece is made

A cast piece starts as molten gold poured into a mould. A 5D piece is grown instead, a layer at a time, on a model that is thrown away at the end. Here is one pendant, cut open so you can see the inside at each stage.

airwall 0.1 to0.25 mm

Electroforming is older than the reels suggest

Plenty of Indian jewellers say electroforming is nothing new, and they are right. Electroformed jewellery and idols have been made in Coimbatore and Bengaluru for years. What is newer is hard pure 24K from China, sold there under so many names that a 2025 standard put them under one.

  1. 1838

    Electroforming is invented, to copy printing plates and sculpture in metal.

  2. Mid-1980s

    Degussa in Germany brings electroforming to gold jewellery.

  3. 2008-09

    Hard pure gold reaches jewellery shops in China.

  4. May 2025

    A Chinese industry standard names it hard pure gold and sets a minimum hardness, to replace labels like 3D, 5D and 5G.

  5. 2026

    India's IIJS trade show lists electroformed pieces as a trend, and reels call it a new kind of gold.

Three ways to make a big piece light

Indian jewellers have made heavy-looking pieces light for generations. Cut the same bangle through and the difference is all on the inside.

airSolid 22KHollow 22K with lac5D hard gold

Solid 22K

Inside
Gold all the way through
Purity
22K, 91.6% gold
Wear
Takes knocks and can be reshaped
Repair
Soldering, resizing, reshaping
Weight
Heaviest for its size

Hollow 22K with lac

Inside
A 22K sheet packed with lac
Purity
22K; the lac is weighed out of the gold
Wear
Lac inside supports the wall
Repair
Possible, after a look at the build
Weight
Lighter; lac is not gold

5D hard gold

Inside
Air
Purity
Usually 24K
Wear
Hard surface, thin wall that dents under a squeeze
Repair
Limited; a flame softens it
Weight
Lightest; makers say about a third of the gold

How hard 5D gold is, and what heat does to it

The "four times harder" line compares 5D with pure gold at its softest. Pure gold that has been cast measures 20 to 30 on the Vickers scale labs use. China's standard asks hard gold for at least 60, which puts it in the range of the 22K you already wear, until it is heated.

So a 5D piece holds a mirror polish better than soft 24K. Its weak point is the thin wall. At a tenth to a quarter of a millimetre, a hard squeeze or a fall can dent it, and the usual fix for a dent or a break, a little heat and solder, takes the hardness away.

We can order 5D designs for you. Tell us the piece you have in mind and we send designs, weights, today's gold rate and all charges.

Ask for 5D designs

Where 5D makes sense

What it does well

  • A big, bold look for much less gold, so a statement piece fits a smaller budget.
  • The deep colour of 24K, with a surface that keeps its polish.
  • Light enough to wear through a wedding day.

Where it falls short

  • A thin wall dents under pressure.
  • Resizing and most repairs are usually off the table.
  • Less gold for its size, so more of the price is making charge, which does not come back.

That makes it jewellery to enjoy wearing, and a poor way to save. For savings, a gold coin or plain 22K keeps far more of what you pay, as our guide to what old gold fetches shows line by line.

What the bill for a 5D piece carries

BIS hallmark and HUID

Required in Mumbai on gold jewellery of 2 grams and above, 5D included.

Purity

24K jewellery hallmarks at 995 at most. The 999 grade is for coins and bars.

Gold weight

The weight of the gold itself. A 5D piece should have nothing else inside.

Making charge

On its own line, so you can see the part that will not come back.

Have a 5D piece, or thinking of one?

Swarn Shikhar Jewellers, Shop No 6, Aashirwad Building, Narayan Gajanan Acharya Marg, Chembur, Mumbai 400071.

Bring it in and we weigh it and read its purity in front of you. Family jewellers in Chembur for over 40 years.

Frequently asked questions

Is 5D gold real gold?

Yes. A 5D piece is gold all the way through, usually 24 karat, made as a hollow shell. That is different from gold plating, the sone ka paani on one-gram jewellery, which is a thin coat of gold over brass or copper. What a 5D piece lacks is weight, because there is air inside where the wax model used to be.

Is 5D hard gold 24K or 22K?

Most 5D pieces are 24 karat. The same method can also make 22K, 18K and 14K shells. On a BIS hallmark the highest grade for jewellery is 24K at 995 fineness; the 999 grade is kept for coins and bars, so a 5D piece sold as 999 will still hallmark as 995 at most.

Can 5D jewellery have a BIS hallmark and HUID?

Yes, like any gold jewellery. In Mumbai, gold jewellery of 2 grams and above can only be sold with a BIS hallmark and a six-character HUID, and that has been the rule since 1 April 2023. There is no separate BIS category for electroformed pieces, and the free BIS Care app lets you look up any HUID.

Can 5D gold be repaired or resized?

Only in a limited way. Its hardness comes from how the gold was laid down, and the heat of a soldering flame undoes it, leaving the wall soft and thin. Small breaks can sometimes be laser-welded, which keeps the heat local. Resizing and pushing out deep dents are usually not possible on a shell this thin, so treat it gently and store it where nothing presses on it.

What is the resale or exchange value of 5D gold?

A counter pays for the gold in a piece: its weight, times its purity, times the day's rate. A 5D piece is real gold, so that gold has value like any other. What does not come back is the making charge, and because a 5D piece holds less gold for its size, the making charge is a bigger share of what you paid. Bring the piece and its bill in and we weigh it and read its purity in front of you.

Can I take a gold loan on 5D jewellery?

Usually, since it is gold. RBI rules have lenders value only the gold in a piece, after deducting anything that is not gold, so the loan follows the gold weight, not the size. Some lenders take a larger deduction on hollow pieces, so ask yours before you count on a figure.

How can I tell if a piece is 5D or solid?

A 5D piece feels light for its size, and there is usually a tiny hole where the core was drained. A purity machine reads only the surface, so it confirms the gold but not what is inside. In 2024 GIA's lab reported an electroformed bracelet filled with wax or resin that was being sold as solid 14K, which is why weight and build matter as much as the purity reading.

Saw a 5D design you liked?

Send us a photo. We tell you what it would weigh and cost to order, and show you a lightweight 22K piece beside it.

See lightweight 22K necklaces